System Requirements
For Windows | For Macintosh | |
|
| |
PC with processor better than Pentium |
| |
450MHz (Pentium 800MHz | Power Mac G3 or later | |
recommended) |
| |
|
| |
Windows 98SE/2000/ME/XP/Vista | Mac OS 9.0~10.4 | |
|
| |
Minimum 128MB RAM | Minimum 64MB RAM | |
(512MB recommended) | ||
(256MB recommended) | ||
200MB of available hard disk space | ||
110MB of available | ||
(1GB recommended) | ||
| ||
|
| |
USB port | USB port | |
|
| |
|
| |
1024x768 pixels, |
| |
compatible monitor |
| |
recommended), Microsoft DirectX 9.0 or |
| |
later |
| |
|
|
About the software
After inserting the
Before connecting the camera to the PC, you should first install the camera driver.
※Screen Captures illustrated on this manual is based on English Edition of Windows.
■Camera driver : This enables images to transfer between the camera andPC.This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader. After installing the driver and connecting this camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My Computer]. A USB Storage Driver is provided only for Windows. A USB Driver for MAC is not included with the Application CD. You can use the camera with Mac OS 9.0 ~ 10.4.
■XviD codec : This allows movie clipsTo play back a movie clip recorded with this camera, you must install the XviD codec. If a movie clip recorded with this camera does not play well, install this codec. This software is only compatible with Windows.
《85》