Metering
If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures.
- Multi : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area. This is suitable for general use.
- Spot : Only the rectangular area in the centre of the LCD monitor will be metered for light. This is suitable when the subject in the
centre is exposed correctly, regardless of the back lighting.
If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, it is better to use exposure compensation.
Continuous shot
You can select continuous shot, and AEB (Auto Exposure Bracketing).
- Single | : Take one picture only |
|
|
|
|
|
|
|
|
|
- Continuous : Images will be taken continuously until |
|
|
|
|
|
|
|
|
| |
| SHOOTING | |||||||||
| the shutter button is released. The |
|
|
|
|
|
| Single | ||
|
|
|
|
| Continuous | |||||
| shooting capacity depends on the |
|
|
|
| |||||
|
|
|
|
|
|
| AEB | |||
| memory. |
|
|
|
|
|
|
|
|
|
- AEB | : Take three pictures in a series in |
|
|
|
|
|
|
|
|
|
| different exposures: standard | [ PROGRAM mode ] | ||||||||
| exposure(0.0EV), short exposure |
|
|
|
|
|
|
|
|
|
Use the mode if it is hard to decide exposure of the object.
High resolution and picture quality increases file saving time, which increases
If the [Continuous] or [AEB] sub menu is selected, the flash will be off automatically.
If less than 3 pictures are available in the memory, the AEB shooting is not available.
It is best to use a tripod for the AEB shooting as the time to save each image file is longer and the blurring caused by camera shake may occur.
34