Using the Custom White Balance
White balance settings may vary slightly depending on the shooting environment.
You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance.
1. Select the CUSTOM ( |
| ) menu of the |
|
|
|
|
|
|
|
|
|
|
| ||
White Balance. |
|
|
|
|
|
|
|
2. Place a sheet of white paper in front of the |
|
|
|
|
| ||
camera so that the LCD monitor shows only |
|
|
|
|
| ||
|
|
|
|
| |||
white, and then press the SHUTTER button. | Measure:Shutter | ||||||
3. Your custom white balance value is stored. - The custom white balance value will be
applied, starting with the next picture you take.
- The user configured white balance will be remain effective until it is overwritten.
[White paper]
Exposure compensation : This camera automatically adjusts the exposure according to the ambient lighting conditions.
You can also select the exposure value by using the + / - button.
Compensating Exposure
1. Press the + / - button, and then use the UP and DOWN buttons to select the exposure
compensation icon ( |
| ). |
The exposure compensation menu bar will appear as shown.
2.Use the LEFT and RIGHT buttons to set the desired exposure compensation factor.
3.Press the + / - button again. The value you set will be saved and the Exposure Compensation setup mode will close.
If you change the exposure value, the exposure indicator (
A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures.
31