| Installation and Connection | |
EN | ● This appliance is NOT intended for use in a commercial environment. | |
● Please observe the installation instructions provided and note that this appliance should | ||
| ||
| only be installed by a qualified technician. | |
| ● The appliance is fitted with a plug and must only be connected to a properly installed | |
| earthed socket. The fuse protection must be rated at 16 amps (L or | |
| breakers). | |
| ● In case a new socket is need, installation and cable connection must only be done by a | |
| qualified electrician. If the plug is no longer accessible following installation, a pole discon- | |
| necting device must be present on the installation site with a contact gap of at least 3 mm. | |
| ● Adapters, multiway strips and extension cords must not be used. Overloading can result in | |
| fire. | |
| ● Plug in | |
| When the appliance has been connected for the first time, all segments are lit for a second. | |
| After 3 seconds, 12:00 flashes in the display prompting you to select the clock. Do not | |
| forget to reset the clock when you switch to and from summer or winter. |
min | min 564 |
550 | max 568 |
|
|
min 446 |
|
max 450 | 50 |
460
200 cm2
595 | 520 |
|
6