Samsung GT-S7500 Wi-FiDirect, Setup (WPS), ››Connect your device to another device, Scan, WPS PIN, Connect, Settings, Settings, Settings, →Wi-FiDirect, Wireless and network

››Connect to a Wi-Fi AP using a Wi-Fi Protected

Setup (WPS)

Using WPS, you can connect to a secured network. To connect to a Wi-Fi AP with a WPS button,

1 In Idle mode, open the application list and select Settings

→Wireless and network → Wi-Fi settings.

2Select WPS button connection.

3Press a WPS button on the access point within 2 minutes. To connect to a Wi-Fi AP with a WPS PIN,

1In Idle mode, open the application list and select Settings

→Wireless and network → Wi-Fi settings.

2Select a network indicated by the WPS icon and select

WPS PIN.

3On the access point, enter the PIN and press the start button.

Wi-Fi Direct

Learn to use the Wi-Fi Direct feature to connect two devices via a Wi-Fi network without requiring an access point.

››Connect your device to another device

1

2

3

In Idle mode, open the application list and select Settings

→Wireless and network → Wi-Fi Direct settings → OK

→Wi-Fi Direct.

Press [] → Scan.

Select a device and then select Connect.

When the owner of the other device accepts the connection, the devices are connected.

Connectivity

101