Installing the button type battery (CR2025) in the remote control
1.Turn the battery holder counter clockwise (as indicated with () mark) using your
fi ngernail or a coin to open it. | 1 | 2 | 3 |
• The battery holder opens. | |||
2. Insert the battery into the battery holder with |
|
|
|
the positive (+) terminal facing down and |
|
|
|
press it fi rmly until you hear a locking sound. |
|
|
|
3. Place the battery holder back in the remote |
|
|
|
control, match its () mark with the () mark |
|
|
|
on the remote control, and turn the battery |
| <Battery holder> |
|
holder clockwise to lock it. |
|
| |
|
|
|
Precautions regarding the button type battery
•There is a danger of explosion if the button type battery is incorrectly replaced. Replace only with the same or equivalent type.
•Do not pick up the battery using tweezers or other metal tools. This will cause a short circuit.
•Do not recharge, disassemble, heat or immerse the battery in water, to avoid the risk of explosion.
Keep the button type battery out of the reach of the children.
WARNING Should any battery be swallowed, consult a doctor immediately.
12_ English