Samsung HT-BD7200 CONNECTING THE FM ANTENNA, COOLING FAN, ATTACHING THE TOROIDAL FERRITE CORE TO THE POWER CORD OF THE MAIN UNIT, Connections, FM Antenna, (supplied)

Connections

CONNECTING THE FM ANTENNA

1.Connect the FM antenna supplied to the FM 75￿ COAXIAL Jack.

. Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a wall or other rigid surface.

FM Antenna(supplied)

M ` This unit does not receive AM broadcasts.

COOLING FAN

The cooling fan supplies cool air to the unit to prevent overheating.

Please observe the following cautions for your safety.

~Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit may rise and may damage it.

~Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fi re may result.)

ATTACHING THE TOROIDAL FERRITE CORE TO THE POWER CORD OF THE MAIN UNIT

If you attach a Toroidal ferrite core to the power cord of the man unit, it will prevent help to prevent RF interference from radio signals.

1.Pull the fi xing tab of the Toroidal ferrite core to open it. . Make a loop twice in the main unit power cord.

3.Attach the Toroidal ferrite core to the main unit power cord as the fi gure shows and press it until it clicks.

30