Installing the Speakers on the Tallboy Stand
Connections 02
*HT-C453 only - Front Speakers
*HT-C455 only - Front/Rear Speakers
1.Turn the Stand Base upside-down and connect it to the Stand.
2.Insert four small screws clockwise into the four holes marked using a screwdriver as shown in the illustration.
3.Connect the upper Speaker to the assembled Stand.
4.Insert another large screw clockwise into the hole on the rear of the speaker using a screwdriver.
Connecting The Speakers
1
3
Stand
Base
Stand
Speaker
Stand
2
4
1.Press down the terminal tab on the back of the speaker.
2. Insert the black wire into the black terminal
3.Connect the connecting plugs to the back of the product by matching the
colours of the speaker plugs to the speaker jacks. | Black | Red |
In case of HT-C450
Centre Speaker |
|
|
Front Speaker (R) | Front Speaker (L) | |
| VIDEO |
|
| OUT |
|
DIGITAL | HDMI OUT |
|
AUDIO IN |
| |
OPTICAL |
|
|
| AUX IN | COM |
Rear Speaker (R) | Rear Speaker (L) |
Subwoofer
* Refer to page 16 for the speakers of HT-C453/C455.
English 17