Samsung HT-C729 HT-C720/EDC, HT-C720/XEE, HT-C720/XEF, HT-C729/XEG Removing/Installing the speaker on the stand, Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit, English, * Front Speakers only

Removing/Installing the speaker on the stand

Connections 02

* Front Speakers onlyHow to remove the speaker

1

If you attach the speaker on the wall, remove the stand before using it.

1. Pull out the stand in the arrow direction as shown.

2

• Be careful not to put excessive force when removing it. Otherwise, it can be damaged.

2. This is the appearance after the stand is removed.

How to install the speaker

1. Connect the stand in the arrow direction so that it fits the	1	2
corresponding holes (x4) on the speaker.

2. Fully insert the stand in the arrow direction as shown.

3. This is the appearance after the speaker unit is installed.

3

Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit

If you attach a Toroidal ferrite core to the power cord of the man unit, it will help to prevent RF interference from radio signals.

1.Pull the fixing tab of the Toroidal ferrite core to open it.

2.Make a loop twice in the main unit power cord.

3.Attach the Toroidal ferrite core to the main unit power cord as the figure shows and press it until it clicks.

FM ANT.

￿￿￿￿￿￿￿￿￿

English 17

HT-C720-EUR_ENG-0607.indd 17 2010-06-07 ￿￿ 10:32:53