Samsung HT-DB120 Insert Remote Batteries, cover, arrow, PREPARATION, of the remote by, cover on the back, pressing down and, tion to the correct, 1 Remove the battery

Insert Remote Batteries

1 Remove the battery	2 Insert two 1.5V AAA	3 Replace the battery
cover on the back	batteries, paying atten-	cover.
of the remote by	tion to the correct
pressing down and	polarities (+ and –).
sliding the cover in
the direction of the
arrow.

PREPARATION

Caution Follow these precautions to avoid leaking or cracking cells:

• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).

•Use the correct type of batteries.Batteries that look similar may differ in voltage.

•Always replace both batteries at the same time.

•Do not expose batteries to heat or flame.

Range of Operation of the Remote Control

The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor.

To open the remote control cover, push the top of the cover, then slide downward.

10