Samsung HT-DM150 Listeningto Radio, PresettingStations, Remote Control Unit, TUNER, Tune in to the, BAND, TUNER(BAND), Main Unit, OPERATION RADIO, MO/ST, Press the Function

Listening to Radio

You can listen to the chosen band (FM, MW, LW broadcast stations) by using either the automatic or manual tuning operation.

	Remote Control Unit
1		Press TUNER/	2	Tune in to the
		BAND button.		desired station.

Presetting Stations

You can store up to:

15	FM stations	• FM	Frequency Modulation
8 MW stations		• AM(MW)	Medium Wave
7	LW stations	• LW	Long Wave

Example: Presetting FM 89.1 in the memory

Press the
TUNER(BAND)	Press	to	Press the TUNER
1button and select	2 select "89.10".		3 MEMORY button.

•The selection toggles back and forth between "FM ➝ MW ➝ LW" each time the TUNER(BAND) button is pressed.

Automatic Tuning 1

Automatic Tuning 2

Manual Tuning

When is pressed, a preset broadcast station is selected.

Press and hold to automatically search for active broadcasting stations.

Briefly press to increase or decrease the frequency incrementally.

• Each time the button is pressed,	• Refer to Step 2 on page 55 to	• “PROGRAM” flashes in the
the band switches between	automatically or manually tune in	display.
"FM ➝ MW ➝ LW".	to a station.
MHZ	MHZ	PROGRAM	MHZ
	TUNED

kHz

Main Unit

Press the Function

1button to select the desired band (FM, MW, LW).

2 Select a broadcast station.

Automatic Tuning 1 Press the STOP ( )

button to select

PRESET and then press button to select the preset station.

Automatic Tuning 2 Press the STOP ( ) button

to select "MANUAL" and

then press and hold button to automatically search the band.

Manual Tuning Press STOP ( ) to select MANUAL and then briefly

press to tune in to a lower or higher frequency.

4 Press to select preset number.

•You can select between 1 and 15.

PROGRAMMHZ

5	Press the TUNER	6	To preset another
			station, repeat
	MEMORY button.
			steps 2 to 5.

•Press the TUNER MEMORY button before ‘PROGRAM’ disappears from the display.

•‘PROGRAM’ disappears from the display and the station is stored in memory.

MHZ

OPERATION RADIO

Press MO/ST button to listen in Mono/Stereo.

(This applies only when listening to an FM station.)

55	•	Each time the button is pressed, the sound switches between "STEREO" and "MONO".
	•	In a poor reception area, select MONO for a clear, interference-free broadcast.

To tune in to a preset station, press on the remote control to select a channel.

56