Samsung HT-ES8200 HT-ES8200/EN, HT-ES8200/XE, HT-ES8200/XN, HT-ES8200/ZF Attaching the Toroidal Ferrite Core to the Power Cord of the Subwoofer, clicks, open it, | NOTE |, subwoofer, Make a loop twice in the power cable of the

2.Place the Wall Bracket on the wall so that the arrow side faces upward and use four screws (not included) to fix it on the wall. Drive the screws into a stud or into mollies for secure support. After the Bracket-Set is installed, slide and insert the Blu-ray Disc product into the appropriate slots of the Wall Bracket.

NOTE

Screws for the wall bracket are not included. Purchase screws (and mollies) appropriate for your type of wall.

Make sure that the product is installed standing on the ground or hanging on the wall. Laying down the product on the ground may cause the product malfunction.

Attaching the Toroidal Ferrite Core to the Power Cord of the Subwoofer

If you attach a Toroidal ferrite core to the power cord of the Subwoofer, it will help to prevent RF interference from radio signals.

1.	Pull the fixing tab of the Toroidal ferrite core to	HDMI OUTHDMI IN 1HDMI IN 2	(OPTICAL)
			AUX IN
	open it.		DIGITAL
			AUDIO IN
2.
	Make a loop twice in the power cable of the	DIGITAL	ONLY FOR
	subwoofer.	(OPTICAL)	UPDATE
3.	Attach the Toroidal ferrite core to the Subwoofer	AUDIO IN
	power cord as the figure shows and press it until it
	clicks.

English 17

Started Getting 02

HT-ES8200_XU_0425.indd 17 2012-04-25 오전 11:14:15