Samsung HT-H4550R Networks and the Internet, Configuring Your Network Connection, ĞĞAutomatic, | 20 English, Settings, menu, Rating, Rating, button, button, General, Support

Settings

DivX® Video	Codes to purchase and play
	View DivX® VOD Registration
On Demand	DivX® VOD contents.
	Language

You can select the language you prefer for the On- Screen Menu, disc menu, etc.

•The selected language will only appear if it is supported on the disc.

Security

The default PIN is 0000. Enter the default PIN to access the security function if you haven't created your own PIN.

BD Parental	Prevents playback of Blu-ray Discs
	with a rating equal to or above a
Rating	specific age ratings unless the PIN
	is entered.
DVD Parental	Prevents playback of DVDs with a
	rating above a specific numerical
Rating	ratings unless the PIN is entered.
Change PIN	Change the 4-digit PIN used to
	access security functions.
	General
Time Zone	You can specify the time zone that
	is applicable to your area.
	Support
Software	For more information about the
	Software Upgrade function, see
Upgrade	"Upgrading Software" on page 21.
Contact	Provides contact information for
Samsung	assistance with your product.
Terms of	View the general disclaimer
Service	regarding third party contents and
Agreement	services.
Reset	All settings will revert to the default
	except for the network settings. The
	default security password is 0000.

Networks and the Internet

When you connect this product to a network, you can use network based applications and functions such as BD-LIVE and upgrade the product's software through the network connection.

Configuring Your Network Connection

Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, we recommend you use the Automatic procedure below. If it is static, you must use the Manual procedure that follows.

•Before you begin, confirm that the product is connected to your router with a network cable.

ĞĞAutomatic

To start the configuration process, follow these steps:

1.In the Home menu, select Settings, and then press

vbutton.

2.Select Network, and then press the v button.

3.Select Wired Network Settings, and then press thethe

vbutton.

The Wired Network Settings screen appears.

4.Press the +button on the Internet Protocol Setup

menu.

Use $%button to select Auto, and then press the

vbutton.

Settings

Display		Wired Network Settings
	Internet Protocol Setup		: Auto				\
Audio
Network		IP Address	:	0	0	0	0
System		Subnet Mask	:	0	0	0	0
Language		Gateway	:	0	0	0	0
Security DNS			: Auto
General		DNS Server	:	0	0	0	0
Support

>Move "Select 'Return

5.The Network function acquires and fills in the values for IP Address, Subnet Mask, etc., automatically.

6.After the Network function has acquired the network values, press the RETURN (') button.

7.Select Network Test, and then press v. The home

cinema validates the network connection. When it is done, press the RETURN (') button.

20 English