Samsung HT-HS5200 Wireless Network, Settings, Done, 123#&, 123#&, Return, button, Security, Add Network, Add Network, Network Settings, Network Settings, ĞĞWireless - Manual

Settings

6.Repeat Steps 4 and 5 until you have filled in all parameters.

✎✎You can get the network parameter values from your Internet provider.

7.When finished entering all the parameter

values, select Return ('), and then press the vbutton. The home cinema verifies the network connection and then connects to the network.

Wireless Network

You can set up a wireless network connection in three ways:

-- Wireless Automatic -- Wireless Manual -- WPS(PBC)

Before you configure the wireless network connection, disconnect any wireless network devices currently connected to the product or, if applicable, the product's current wired connection.

ĞĞWireless - Automatic

Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 17)

1.In the Network Settings screen, change Network Type to Wireless. The product searches for and then displays a list of the available networks.

Network Settings

4.When finished, select Done, and then press the

vbutton. The product verifies the network connection and then connects to the network.

✎✎You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem.

ĞĞWireless - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 17)

1.	In the Network Settings screen, change
	Network Type to Wireless. The product searches
	for and then displays a list of the available
	networks.
2.	Scroll through the list, select the desired
	network or Add Network, and then press the
	vbutton.
3.	If you selected a network in Step 2, go to Step 6.
	If you selected Add Network, go to Step 4.
4.	Enter your wireless network or wireless router's
	name.
	●● Enter numbers directly using the number
	buttons on your remote control.
	●● Enter letters by selecting a letter with the
	▲▼◀▶ buttons, and then pressing the v
	button.
	●● To display capital letters (or redisplay lower
	case letters if capital letters are displayed),

Select your network type.

Network Type Wireless

Wireless network

si-ap

MIC

KIMING_VTOWER

WPS(PBC) Search

You can connect your BD Home Theater to the

internet. Please select which wireless network to use.

select , and then press the vbutton.

●● To display symbols and punctuation, select

123#&, and then press the vbutton. To

redisplay letters, select 123#&, and then

press the vbutton.

When finished, select Done, and then press the

vbutton.

5. On the Security method screen that appears,

mMove "Select 'Return

2.Select the desired network, and then press the vbutton.

3.On the Security screen, enter your network's security code or pass phrase.

Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with ▲▼◀▶ buttons, and then pressing vbutton.

use the ▲▼ buttons to select the network's

Security method, and then press the v

button. On the next screen, enter your

network's security code or pass phrase.

●● Enter numbers directly using the number

buttons on your remote control.

●● Enter letters by selecting a letter with the

▲▼◀▶ buttons, and then pressing the v

button.

18 - English