Installing the Speakers on the Tallboy Stand
1.Turn the Stand Base
2.Use the driver to combine the screws on the 3 marked holes.
3.Straighten a supplied speaker wire and put in the hole on the centre of Stand Base.
4.Connect the upper Speaker to the assembled Stand.
5.Insert a screw clockwise into the hole on the rear of the speaker using a screwdriver.
And then connect a speaker cable.
6.This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
1 Stand Base | 2 |
Stand
34
Speaker
Stand
56
Connections
Speaker Cable Connections
* Front/Surround Speakers only
1.Match each speaker cable bundle to the correct speaker by matching the colour coded plug on each bundle to the coloured sticker on the bottom of each speaker.
2.Connect the speaker wire plugs from each speaker to the back of the product by matching the colours of the speaker plugs to the colours of the speaker jacks. When connecting, make sure to match label colour on the back of speaker.
9 - English