Samsung HT-J5150 HT-J5150/EN, HT-J5150/TK, HT-J5150/ZF manualContents

Contents

	GETTING STARTED			PLAYING CONTENT
5	Accessories		19	Switching the Source Device
5	Speaker Components	19		Playing Commercial Discs
6	Front Panel	19		Playing a Disc with User Recorded Content
6	Rear Panel	20		Playing Files on a USB Device
7	Remote Control	21		Controlling Video Playback
		23		Playing a Pre-Recorded Commercial Audio Disc
	CONNECTIONS
8	Connecting the Speakers	23		Controlling Music Playback
		25		Playing Photo Content
11	Connecting to a TV and External Devices	25		Using the Special Effects Remote Control
	SETTINGS			Buttons
12	The Initial Settings Procedure
				APPENDIX
12	The Home Screen at a Glance		27	Additional Information
13	Accessing the Settings Screen	28		Disk and Format Compatibility
13	Settings Menu Functions	33		Troubleshooting
16	Radio Setup	36		Specifications
18	Upgrading Software	37		Licences

Wiring the Main Power Supply Plug (UK Only)

IMPORTANT NOTICE : The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same colour as the fuse fitted in the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord. Never attempt to insert bare wires directly into a mains socket. A plug and fuse must be used at all times.

IMPORTANT : The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN = LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:–The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.

IMPORTANT : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH LETTER E OR BY THE EARTH SYMBOL U, OR COLOURED GREEN OR GREEN AND YELLOW.

4 - English