~Each time you press the button, the display change
to show you the following information : PS NAME RT CT Frequency-When pressing the buttons on the primary remote control, make sure that you have selected the FM station using the primary remote control.
RDS DISPLAY | TA | |
1 | 2 | 3 |
PTY - | PTY SEARCH | PTY + |
4 | 5 | 6 |
While searching, <PS NAME> appears and then the station
1. Press the PTY SEARCH button while listening |
to an FM station. |
While searching, <RT> appears and then text messages the
2. Press the PTY- or PTY+ button until the PTY |
code you want appears on the display. |
~ The display gives you the PTY codes |
described to the right. |
RT (RadioText) station sends will be displayed. <NO RT> appears if no signal is sent.
3. Press the PTY SEARCH button again, while the |
PTY code selected in the previous step is still on |
the display. |
~ The centre unit searches 15 preset FM |
stations, stops when it finds the one you have |
selected, and tunes in that station. |
When the display shows PS,or RT signals,the following characters are used.
~The display window cannot differentiate upper case and lower case letters and always uses upper case letters.
~The display window cannot show accented letters, <A,> for instance, may stands for accented <A’s> like <À, Â, Ä, Á, Å and Ã.>
PTY (Program Type) indication andOne of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by specifying the PTY codes.
To search for a program using the PTY codes~Before you start!-The PTY Search is only applicable to preset stations.-To stop searching any time during the process, press 5 button while searching.-There is a time limit in doing the following steps. If the setting is cancelled before you finish, start from step 1 again.
When you connect this product to a network, you can use network based applications and functions such as
4.Go to the instructions for Wired networks starting below or the instructions for Wireless networks on the right of next page.