Setting the DRC (Dynamic Range Compression)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
GB
Setting the HDMI Audio
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
1 In Stop mode, press the MENU button.
2 Press the Cursor
MOVE ENTER RETURN EXIT
When the Cursor
CHANGE | RETURN | EXIT |
Setting the AV SYNC
MOVE ENTER RETURN EXIT
MOVE SELECT RETURN EXIT
1 | In Stop mode, press the MENU button. | |
2 | Press the Cursor | button to move to <Audio> and then press the ENTER button. |
3 | Press the Cursor | button to move to <HDMI AUDIO> and then press the |
| ENTER button. |
|
4 | Press the Cursor | , button to select <ON> or <OFF> and then press the |
| ENTER button. |
|
•ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only.
•OFF : Video is transmitted over the HDMI connection cable only, and audio is output through the home theater speakers only.
• The default setting of this function is HDMI AUDIO OFF.
• HDMI AUDIO is automatically
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match
the video.
MOVE ENTER RETURN EXIT
1 | In Stop mode, press the MENU button. | |
2 | Press the Cursor | button to move to <Audio> and then press the ENTER button. |
3 | Press the Cursor | button to move to |
| ENTER button. |
|
4 | Press the Cursor | , button to select the |
press the ENTER button.
You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.
SETUP
MOVE SELECT RETURN EXIT
52 | 53 |