1. Manuals
  2. Brands
  3. Home Audio
  4. Soundbar/SoundTower
  5. Samsung
  6. Home Audio
  7. Soundbar/SoundTower

Samsung 350W 9.1-Kanal Curved Soundbar HW-J8501 USING THE NETWORK STANDBY ON FUNCTION, USING THE MULTIROOM LINK, BEFORE YOU BEGIN, ++Communication Basics, Internet, FUNCTIONS

HW-J8500/EN, HW-J8500/XN, HW-J8501/EN, HW-J8501/ZF, HW-J8510/XE, HW-J8511/XE

1 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
Download on canonical page 34 pages, 9.72 Mb

FUNCTIONS

USING THE NETWORK STANDBY ON FUNCTION

The Network Standby On function becomes available if wireless connection was properly established between the smart device and Soundbar. This function turns on the Soundbar automatically when a smart device attempts to connect to the Soundbar via Bluetooth or Wi-Fi. If the Soundbar was turned on via Bluetooth connection, its input mode is set to BT automatically. Turning on the Soundbar via Wi-Fi is available only by using the App. For further information, refer to the Web manual.

1.Connect the Smart device to your Soundbar.

2.Turn the Network Standby On function on by pressing the ] button on the Soundbar remote for more than 5 seconds. You can turn the function off by pressing the ] button again for more than 5 seconds.

Available only if the Soundbar is listed among the Smart device’s paired devices. (The Smart device and the Soundbar must have been previously paired at least once.)

Soundbar will appear in the Smart device’s searched devices list only when the Soundbar is displaying [BT READY] or [WiFi READY].

In the TV SoundConnect mode, the Soundbar cannot be paired to another Smart device. ●If Network Standby On function did not work

-- The Network Standby On is set to Off.

Wi-Fi connection to the Soundbar will be terminated if its power cord was disconnected or the power was cut off. Turn on the Soundbar and reconnect.

ENG

USING THE MULTIROOM LINK

Once the Soundbar is connected to a smart device with Multiroom App, you can connect multiple Samsung Multiroom devices together wirelessly.

BEFORE YOU BEGIN

++Communication Basics

Smart Device: Android or iOS (App Control)
Internet

Wireless Router

1.Requirements: Wireless Router, Smart Device

2.The wireless router should be connected to the Internet.

3.The smart device should be connected to the router via a Wi-Fi connection.

27

MENU

Models

Contents