7Setup and Reset
7.1HUB
Configure the settings to use the HUB function on the product.
Refer to "2.1 About "HUB Monitor"" for details about how to use the HUB function. To open the HUB settings screen, press HUB on the stand.
7.1.1USB Connection
You can view the USB cable connection status between the product and a PC.
The connection status will be shown even when the input source is not USB mode.
Selecting the USB Connection option when a USB cable is connected will change the input source to USB mode.
Configuring USB Connection
1Press [m ] on the product.
2Press [
3Press [
4If a USB cable is connected, press [
HUB |
|
| |
USB Connection | Connected | ||
Analog | Disconnected | ||
HDMI | Disconnected | ||
| USB Super Charging | ||
|
Return | Move | Enter |
7.1.2Analog
You can view the Analog cable connection status between the product and a PC.
The connection status will be shown even when the input source is not Analog mode.
Selecting the Analog option when an analog cable is connected will change the input source to Analog mode.
7 Setup and Reset 61