3Using MDC
MDC (Multiple Display Control) is an application that allows you to easily control multiple display
devices simultaneously using a PC.3.1Configuring Settings for Multi Control
Assign an individual ID to your product.
3.1.1 Configuring settings for Multi Control
1
2
This product can only be controlled by using the remote control.
Press MENU on the remote control.
Press
ID Setup
Assign an ID to a set. (Range: 00~99)
Press
ID Input
Enter the ID number of the product connected to the input cable for input signal reception. Enter the number you want using the number buttons on the remote control.
3.2Connection Using the RS232C Cable
RS232C IN
1Connect the RS232C cable to [RS232C IN] on the product and RS232C OUT on the PC.
3 Using MDC 61