Samsung DM40D Standby Control, Power Button, Network Standby, Power Control, Off, Off, Auto, Power Button, Auto Power On, PC module power, Standby Control, Network Standby

Power Control

Auto Power On	Off
PC module power
Max. Power Saving	On
Standby Control	Auto
Power Button	Power on only
Network Standby	Off

-- The displayed image may differ depending on the model.

Standby Control

You can set the screen standby mode to be applied when an input signal is received.

•• Auto

Power-saving mode will activate if no input signals are detected even though a source device is connected to the display. The message No Signal will appear if no source device is connected.

•• OffThe message No Signal will appear if no input signals are detected.

――The Standby Control option is only enabled when Source is set to PC, DVI, HDMI or DisplayPort. ――If No Signal is displayed although a source device is connected, check the cable connection.

――If No Signal Message is set to Off, the No Signal message does not appear. If this is the case, set No Signal Message to On.

•• OnPower-saving mode will activate if no input signals are detected.

Power Button

The power button can be set to either turn on the power or turn on/off the power.

•• Power on only: Set the power button to turn on the power.•• Power on and off: Set the power button to turn on/off the power.

Network Standby

This feature keeps the network power on when the product turns off.

•• Off / On