Samsung 400UXN-3 manual 6

Introduction

DVI OUT (LOOPOUT)

•Connect a monitor to another monitor through a DVI, DVI to HDMI cable.

•Connect a DVI or DVI-HDMI cable to [DVI OUT (LOOPOUT)] on the product and [DVI IN] or [HDMI IN] on another monitor.

•HDMI and network signals sent via the [DVI OUT(LOOPOUT)] port are dis- played on the second display which has the [DVI IN] port.

Note

•The Loopout function can be used to du- plicate the screen of the primary display. Connect [DVI OUT] on the primary dis- play to [DVI IN] or [HDMI] on another display.

•A maximum of 100 monitors can be con- nected to DVI-Loopout (using a 2m-long DVI cable). Up to HD resolution can be supported. Compatible input sources in- clude DVI IN, HDMI IN 1, and HDMI IN 2 (MagicInfo).

•The status of the cable may have a great effect on the Loopout performance.

RGB/COMPONENT IN (PC/COMPO- NENT Connection Terminal (Input))

•Connect the [RGB/COMPONENT IN] port on the monitor to the RGB port on the PC using the D-SUB cable.

•Connect the [RGB/COMPONENT IN] port on the monitor to the COMPONENT port on the external device using the RGB to COMPONENT cable.

•Connect the [RGB/COMPONENT IN] port on the monitor to the BNC port on the PC using the RGB to BNC cable.

DVI IN (PC Video Connection Terminal)

Connect the [DVI IN] port on the monitor to the DVI port on the PC using the DVI cable.

RGB/DVI/DP/HDMI AUDIO IN (PC/DVI/ DP/HDMI Audio Connection Terminal (In- put))