Introduction
your digital output device using a HDMI ca- ble.
Up to HDMI cable 1.0 can be supported.
BNC (Analog PC) Connection: connecting the R, G, B, H, V ports.
The number of LCD Displays that can be connected to the loopout depends on the ca- bles, signal source, etc. With cables or signal source where there is no degradation, up to 10 LCD Displays can be connected (May not be supported depending on the connected cable).
(Applicable to the
During component input, please check specifications for the input ports below.
[R/Y, G/PB, B/PR, H, V]
•[R/Y]
•[G/PB]
•[B/PR]
Applicable to the
Applicable to the
Applicable to the