This is used to make up for the weak RGB signal transmitted by a long signal cable.
(Available in PC, BNC mode only)
1)Signal Balance
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [ENTER] → [∧ / ∨] → [ENTER] Selects either On or Off with the signal control.
2)Signal Control
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [< / >] → [ENTER]
Adjusts the Gain and Sharpness manually.
Size
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] The Size can be switched.
1)16:9
2)4:3
PIP Picture
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [< / >] → [ENTER]
Adjusts the PIP Screen Settings.
1)Contrast
Adjusts the Contrast of the PIP window on the screen.
2)Brightness
Adjusts the Brightness of the PIP window on the screen.
3)Sharpness
Adjusts the difference between the lightest and darkest areas of the PIP window.
4)Color
Adjusts the Color of the PIP window on the screen.
5)Tint
Adds a natural tone to the PIP window.
You can view a picture from AV,
Available Modes: PIP ON
Picture [ AV /
Available Modes
Mode
[MENU] → [∧ / ∨] → [ENTER] → [ENTER] → [∧ / ∨] → [ENTER]
The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are preset at the factory.
Dynamic, Standard, Movie, or Custom can be activated.
1) Dynamic