Samsung MAX-L68 Listening to a Cassette, CD Synchro Record Feature, Recording a Compact Disc, 9 Up, To, REC, REC, TAPE, Press, Press, on page, REC/Pause, On/Standby

			Listening to a Cassette
	GB
			Always treat your cassettes with care; refer, if necessary, to
			the section entitled “Precautions When Using Audio Cassettes”
			on page 24.
1	Switch the system on by pressing the On/Standby button.
2			Select the TAPE function by pressing TAPE on the front panel.
3			Open either cassette deck 1 or 2 by pushing and releasing the deck
4			cover where PUSH EJECT (	) is written.
			Insert the pre-recorded cassette with the open edge of the tape
			facing downward.
5			Close the deck by pushing on it until it clicks into place.
			Result: Depending on the deck selected, the 1 or 2 indication is
			displayed in front of the counter number.
6			If you have inserted two cassettes, press Deck 1/2 on the front panel
			or directly the Deck 1/2 button on the remote control to select the
			cassette to be played.

CD Synchro Record Feature

You can record a compact disc on a cassette in two different ways:

Synchronised recording

Direct recording

This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.

1	Switch the system on by pressing On/Standby.
2	Insert a blank cassette in Deck 2.
3	Select the CD function by pressing CD on the front panel.
4	Load a compact disc.
5	Select the required disc.
6	Select the required track and press CD Synchro or press CD
	Synchro directly to start recording at the beginning of the disc.
	Result: REC is displayed and recording starts.
7	To stop recording, press	.

	Result: Depending on the deck selected, the TAPE 1 or TAPE 2
		indication is displayed.
7
		To listen to...	Press ...
	Side A		TAPE (	) once	DECK 1 and DECK 2
	Side B		TAPE (	) twice	DECK 2 only
	Result: The cassette starts playing.

On/Standby

	Demo
1	PTY
	RDS
	Display

Timer /Clock

Mono/ST

Deck 1/2

Multi	F
	unction

							Volume
							+
							_
			3				Power
							Surround
Preset/				CD
Memory			Program	Repeat
	TUNER	CD
	Band						S.BASS
	D / P / S
REV.Mode	DIRECT PLAY & SELECTION		Shuffle
	TAPE	AUX					E Q
	CD 6
					it		Enter
		Dubbing		Mul		Jog	D.S.P
REC/Pause	Synchro	Normal	HI - Speed

8 When the cassette is stopped, select one of the following functions
	as required.
	To...	Press ...
	Rewind the cassette
	Fast-forward the cassette

On/Standby

	Demo
1	PTY
	RDS
	Display
	Timer
	/Clock

	Mono/ST	Preset/			Prog
		Memory
			TUNER	CD
			Band
		REV.Mode 2,7	D / P / S
Deck 1/2			DIRECT PLAY & SELECTION		Shuff
6			TAPE	AUX
Multi	Function		CD	Dubbing
		REC/Pause	Synchro	Normal	HI - Speed
Down		Up
8		8	CD–R/RW PLAYBACK

Tuning Mode

Phones

Down7Up

CD–R/RW PLAYBACK

Tuning Mode

Recording a Compact Disc

The direct recording mode enables you to start recording with any track on the compact disc.

		You can only record on cassettes in Deck 2.
		You do not need to adjust the volume, as it has no effect on the recording.
1	Switch your system on by pressing On/Standby.
2	Insert a blank cassette in Deck 2.
3	Select the CD function by pressing CD on the front panel.
4	Load the compact disc.
5	Select the required disc.
6	Select the required track on the compact disc and press					on the front panel
7	or		on the remote control to set the compact disc player to Pause mode.
	Press the REC/Pause.
	Result: REC is displayed.
8	Press the			to start playing the track.
	Result: The track is recorded on the cassette.
9	To stop recording, press				.

On/Standby

Demo

PTY

1 RDS Display

Timer /Clock

	Mono/ST
Deck 1/2
Multi	Function

									Volume
									+
	3,6,8								_
Preset/					CD				Power
									Surround
Memory				Program	Repeat
	TUNER		CD
	Band								S.BASS
	D / P / S
REV.Mode	DIRECT PLAY & SELECTION			Shuffle
	TAPE		AUX						E Q
7
									Enter
			Dubbing		ul	it	J	og	D.S.P
	CD				M
REC/Pause	Synchro	Normal		HI - Speed

Phones

Down	9 Up
	CD–R/RW PLAYBACK
	TuningTuningModeMode

18