Samsung MAXS725RH/XEF Demo/Dimmer function, Setting the Clock, MAX-S720GBR1~15 2/19/03 2:40 PM Page, To, To, Left, Left, Enter, Right, Right, Enter, Multi Jog, Demo/Dimmer

Demo/Dimmer function

All functions available on the system can be viewed on the display and the display's brightness can be switched between "on" and "off".

1	Press the Demo/Dimmer button.
	Result: All functions available on the system appear on the front
	panel display.
	Each of these are explained in detail in this guide. Please refer to
	the relevant section.
2	Press the Demo/Dimmer button again.
	Result: The Dimmer function is selected and the display darkens.
3	Press the Demo/Dimmer button once again to brighten the front
	panel display.

A display brightness control can only be performed while the system power is on.

Your system is equipped with a clock which allows you to turn your system on and off automatically. You should set the clock:

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1	Switch the system on by pressing Standby/On.
2	Press Timer/Clock twice.
	Result: CLOCK is displayed.
3	Press Enter.
	Result: The hour flashes.
4
4	To...	Turn the Multi Jog knob to the...
	Increase the hours	Right
	Decrease the hours	Left
5	When the correct hour is displayed, press Enter.
	Result: The minutes flash.
6
6	To...	Turn the Multi Jog knob to the...
	Increase the minutes	Right
	Decrease the minutes	Left
7	When the correct time is displayed, press Enter.
	Result: The clock starts and is displayed, even when the system is in

You can display the time, even when you are using another function, by pressing Timer/Clock once.

You can also use Program/Set button on the remote control to instead Enter button in step 3, 5, 7.

3,5,7

4,6