Installation Guide | SAMSUNG PROPRIETARY |
RAPID mode Limitations
13)If the msiexec.exe is either unstable or corrupted, RAPID mode enable fails with the error message “The Windows Installer service failed to start. Start the Windows Installer service manually, upgrade the Windows Installer service, and check if the last updated or installed program in Windows was successful. If the problem persists, contact the A/S center.”
The issue can be fixed by:
-Unregister and reregister Windows Installer service / MSI service.
On the Start menu, click Run.
In the Open box, type “msiexec /unreg”. And then press ENTER.
On the Start menu, click Run
In the Open box, type “msiexec /regserver”. And then press ENTER.
Try enabling RAPID mode again.
If RAPID mode does not enable, follow the steps below.
-Updating Windows Installer
If your Windows Installer is not the latest version, corrupted or msiexec is missing, please install the latest version of Windows Installer, then try enabling RAPID mode again.
-If none of the above procedures work, we recommend reinstalling Windows.
Revision2.2
10