Samsung NZ64H37070K/EO, NZ64H37075K/EO display is illuminated, What should I do if the, What should I do if the display is illuminated, •The hob is overheated because of abnormal operation

What should I do if, after the cooking zones have been switched off, residual warmth is not indicated in the display?

Check for the following possibility:

•The cooking zone was only briefly used and therefore did not become hot enough. If the cooking zone is hot, please call the customer service centre.

What should I do if the cooking zone will not switch on or off?

This could be due to one of the following possibilities:

•The control panel is partially covered by a damp cloth or liquid.

•The child safety lock is on.

What should I do if the display is illuminated?

Check for the following:

•The hob is overheated because of abnormal operation.•After hob is cooled down, press the “On/Off” control sensor for resetting.What should I do if the display is illuminated?

Check for the following:

•Cookware is unsuitable or too small or no cookware has been placed on the cooking zone

service and warranty

•If you use suitable cookware, displayed message will automatically disapear.What should I do if the cooling fan runs after the hob is turned off?

Check for the following:

•When you have fnished using the hob, the cooling fan will continue to run 1 minute by itself for cooling down.

If you request a service call because of an error made in operating the appliance, the visit from the customer service technician may incur a charge even during the warranty period.

warranty and service _39

2012-11-20