Samsung RA18VHT SETTING UP THE REFRIGERATOR, ICE MAKING, Step, Step, Step, Step, Step, NOTE : After unplug the appliance, wait for about 5minutes before restarting

SETTING UP THE REFRIGERATOR ICE MAKING

Step 1

Clean up inside of the refrigerator with a clean cloth.

Step 2

Insert the power plug into the socket while keep the door open for checking the interior light, Then turn the temperature control button to “MAX”.

Step 3

Close the door and let the refrigerator operate for 2-3 hours.

1)	Fill the ice tray with
	water at about 80% of

its capacity, or at its

“water level” indicator.

2)Carefully place the ice tray on the freezer shelf otherwise the splashed water will be frozen and cause the ice tray is stuck hard.

3) Temp. Control For making quick ice cubes, the temperature

control button must be set to “MAX”

4)The water will become the ice cubes with in 3-4 hours. Please remove the ice tray by pulling it out. Never use any kind of instrument. This may cause damage on the freezer.

Step 4

Check the refrigerator temperature by touching inside the freezer.

5)	To take the ice cubes of the
	the ice cube tray, you should
Step 5	gently twist the ice tray (As
	shown), Do not bend it over.
The appropriate temperature should be
controlled by turing the temperature
control button to “4”, or the desired
temperature can be adjust. Now your	Wait 5
refrigerator is ready to work.
	minutes

NOTE : After unplug the appliance, wait for about 5minutes before restarting.