Operating your refrigerator
CHECKING THE CONTROL PANEL
(TYPE A) | (TYPE B) | (TYPE C) |
5
1
6
2
3
4 | 6 |
Each time you press the button, a short beep will sound.
1Fridge
Press the Fridge button to set the fridge to desired temperature from the range between 1 °C and
7 °C. Default set temperature is set on 3 °C and each time you press the Fridge button, temperature will change in following order and temperature indicator will display the desired temperature.
(TYPE A, B)
(TYPE C)
Press and hold this button for 3 seconds to activate the Vacation function.(TYPE A)
2Freezer
Press the Freezer button to set the freezer to desired temperature from the range between
(TYPE A, B)
(TYPE C)
Fridge or Freezer temp indicator will blink when temperature in the fridge or freezer compartment goes up dramatically by
storing warm food or frequent door opening. (Fridge or Freezer temperature indicator will stop blinking when temperature in the fridge or freezer becomes normal. If temperature indicator does not stop blinking after several hours, please contact your service center.
Press this button for 3 seconds to activate the Power Freeze function. Power Freeze indicator (
If you need to freeze large amount of food stuff, activate Power Freeze function
20 hours before.
3Alarm
1. Door alarm
Press this button to activate the Door alarm function. Alarm indicator (
2. Temperature Alarm
(For (TYPE A,B) control panel models)
Press this button to activate the Temperature alarm function. The alarm indicator (
is fl ashed on the display for fi ve seconds. Then the actual temperature is indicated. To deactivate the Temperature Alarm function, press the Alarm button again.
This warning may operate ;
•when the appliance is turned on
•the freezer compartment is too warm due to a power failure.
Operating _17
14. 3. 24. 3:15 |