Samsung RSH1FLMR rEattaCHing tHE rEfrigErator Doors, or bends, 01TTINGSE UP, setting up _13, 3. Reconnect the wires, Reattaching the Freezer Door, Insert the upper hinge shaft

setting up your side-by-side refrigerator

rEattaCHing tHE rEfrigErator Doors

Once you have safely placed your refrigerator where you plan for it to stay, it is time to put the doors back on.

Reattaching the Freezer Door

1. Replace the freezer door by inserting the water line 1 back into the	1
lower corner of the door and then into the hole on the lower hinge 2 .
Gently pull the water line back down so that it runs straight, with no kinks	2
or bends.

01TTINGSE UP

2.Insert the upper hinge shaft 3 into the hole on the corner of the freezer door 4 . Make sure the hinge is level between the upper hinge hole 5 and the hole of the cabinet 6 and reattach the hinge screws 7 and ground screw 8 by turning in a clockwise direction.

8

5

6

7

3

4

3. Reconnect the wires.

4. Place the front part of the upper hinge cover 9 on the front of the upper hinge 10 and reattach with the screw.

10 9

setting up _13