Operations
To dispense ice manually
Operations
38 English
1.Pull up the handle of the water bin (01) to open, and then fill the bin with water up to the max line. Gently close the bin so that water does not drop or leak.
CAUTION
•Do not exceed the max line. Excessive water causes the ice to jam and not dispense well.
•Use only potable water. Other liquids, such as green tea or milk may not dispense well.
•Gently close the water bin. Otherwise, the water may drop or leak.
NOTE
•If you encounter a water leak, open the water bin and check if the water bin’s passage to the ice template is frozen. If this is the case, pour lukewarm water into the water bin up to the max line. Let the passage melt.
•It is recommended to clean the water bin’s passage to the ice template on a regular basis because the passage is likely to freeze.
2.Check if the ice freezes completely. Only when the ice has frozen completely, pull up the ice maker lever (02). Then, the ice template (04) rotates and dispenses ice to the ice bucket (03).
CAUTION
•Do not pull up the lever until the ice has frozen completely.