Installation
CONNECTING CABLES AND CHECKING OPERATION
①Connect one end of the BNC cable to the VIDEO OUT Port on the rear of the camera.
②Connect another end of the BNC cable to the VIDEO IN Port on the monitor.
③Finally connect the power adapter to the camera. You can connect 2 lines of the power adapter to the camera using the Slot Head screwdriver as shown in the picture.
(GND: cable with the white stripe line)
1. |
|
32..ATGRLNIADRAM OUT 5. | |
4. | GGERIN 6. |
| SHUTTER(SO) 87.. |
1 | 2 | 3 | 4 | 5 |
|
|
|
| 6 |
SS5DVHHAUUYOTT/NUTTITEEGHRR((SST12IN))
7 | 8 |
Video In Terminal of Monitor Rear
Surface
BNC cable
Video Out Terminal
Note :
– Connect any power source of AC 24V and DC 12V irrespective of polarity.