Samsung SCC-B2331 How to use OSD Menu, DAY, •EXT, •DAY, NIGHT, Note :, Note :, •NIGHT, Note :, Note :, ❖ WHITE BAL, 20 – DIGITAL COLOR CAMERA

How to use OSD Menu

	￿AUTO￿
BURST			OFF
DAY￿NIGHT
BRIGHTNESS			MID
DWELL TIME			2S
NIGHT￿DAY
BRIGHTNESS			MID
DWELL TIME			5S
MASK AREA			1 2
￿		￿	￿

You can set the BURST option to OFF/ON, or select to output the Burst signal in NIGHT mode.

You can select from LOW, MID and HIGH for the brightness of DAY￿NIGHT, which is a brightness level in switching from the color filter to Black-and-White. Closing to LOW from HIGH will switch the filter in a low contrast scene.

The DWELL TIME of DAY￿NIGHT is a time required to determine the need for switching the filter.

You can select from LOW, MID and HIGH for the brightness of NIGHT￿DAY, which is a brightness level in switching from the Black-and- White filter to color. Closing to LOW from HIGH will switch the filter in a low contrast scene.

The DWELL TIME of NIGHT￿DAY is a time required to determine the need for switching the filter.

The MASK menu is used to prevent a filter switch error or inability of determining the switch in existence of a high spot light source at night. If you press the SETUP switch in item 1 or 2 of the MASK menu, you will see a menu where you can specify an area to mask.

￿MASK AREA￿

<SIZE> ￿ <LOCATION>￿

￿ ￿ ￿ ￿ ￿

You can specify Mask 1 and 2 simultaneously.

The mask is used only for determining the filter switch and any excessive bright area at night will be masked.

Note :

–If BACKLIGHT is set to BLC, the MASK AREA function will be deactivated.

•EXT

This enables an auto switch between DAY and NIGHT mode using the interface with the external sensor.

❖ WHITE BAL [DAY/NIGHT]

If you want to adjust the color scheme, use the WHITE BALANCE function.

•DAY

In DAY mode, you can set the color values of RED and BLUE. The screen will be displayed in colors according to your settings.

￿WHITE BAL￿

DAY/NIGHT				DAY
MODE			AWC￿
RED	[00]----I----
BLUE	[00]----I----
R-GAIN		[0248]
B-GAIN		[0247]
￿	￿			￿

Note :

–You can set the values of R-GAIN and B-GAIN only in AWC mode.

•NIGHT

Use the NIGHT mode if you want to set the white balance differently according to the ambient luminance.

If the NIGHT mode is set to OFF, the white balance will always operate as set in DAY mode; if not to OFF, the camera will switch to as set in

20 – DIGITAL COLOR CAMERA