Samsung SCC-B2331 How to use OSD Menu, •DAY, level, •AUTO, Note :, Note :, •NIGHT, Note :, ❖SENS-UP, English –, ❖ DAY/NIGHT, ❖ FLICKERLESS

How to use OSD Menu

1/4000	OFF	ON	ON
1/10K	ON	ON	ON

Note :

–If IRIS mode is set to ELC, the SHUTTER menu will be deactivated as you adjust the brightness using the electronic shutter.

–If the SENS-UP function is set to AUTO, only items of OFF and AUTO are available in the SHUTTER menu.

–If the FLICKERLESS function is set to ON, the SHUTTER menu will be deactivated.

❖SENS-UP

[OFF, AUTO X2, AUTO X4, AUTO X6, AUTO X8, AUTO X12, AUTO X16, AUTO X24, AUTO X32, AUTO X48, AUTO X64, AUTO X96, AUTO X128, AUTO X256, AUTO X512, FIX X2, FIX X4, FIX X6, FIX X8, FIX X12, FIX X16, FIX X24, FIX X32, FIX X48, FIX X64, FIX X96, FIX X128, FIX X256, FIX X512]

Automatically detects the ambient level of darkness in the dark or low contrast scene to extend the accumulated time, keeping the image bright and sharp;

Note :

–If the SHUTTER option is set to fixed electronic shutter or EXT mode, the SENS-UP menu will be deactivated.

–If FLICKERLESS is set to ON, the FIX mode of the SENS- UP menu will be disabled.

❖ FLICKERLESS [OFF, ON]

If set to ON, the shutter speed will be fixed to 1/100(PAL:1/120) second. This will prevent possible screen distortion due to a mismatch between the vertical sync frequency and the blinking frequency of the lighting.

❖XDR (eXtended Dynamic Range) [OFF, LOW, MID, HIGH]

Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a certain pixel unit to determine the optimal visibility.

Select one from OFF, LOW, MID and HIGH. Closing to HIGH will increase the compensation

level.

❖ DAY/NIGHT [DAY,NIGHT,AUTO,]

•DAY

If set to DAY, it will be fixed to DAY mode regardless of the ambient conditions.

•NIGHT

If set to NIGHT, it will be fixed to Black-and-White mode regardless of the ambient conditions.

If you press the SETUP switch with a NIGHT sub menu selected, you will see a menu where you can set Burst to OFF/ON.

If BURST is set to ON, the Burst signal will output together with the black-and-white composite video signal. If BURST is set to OFF, the Burst signal does not output.

You can set the BURST option to OFF/ON, or select to output the Burst signal in NIGHT mode.

•AUTO

The camera will automatically switch between DAY and NIGHT mode, according to the lighting condition.

If you press the SETUP switch with an AUTO- based sub menu selected, you will see the appropriate screen.

￿AUTO￿

BURST		OFF
DAY￿NIGHT
BRIGHTNESS		MID
DWELL TIME		2S
NIGHT￿DAY
BRIGHTNESS		MID
DWELL TIME		5S
MASK AREA		1 2
￿	￿	￿

You can set the BURST option to OFF/ON, or select to output the Burst signal in NIGHT mode.

ENG

English – 19