Samsung SCC-B2035P, SCC-B2335P How to use OSD Menu, INTELLIGENCE, Note :, •FENCE, Note :, ❖ MOTION, •TRACKING, English –, •DETECTION, ❖ ADVANCED, - How to set the line

How to use OSD Menu

INTELLIGENCE						￿FENCE￿
					LINE		OFF
￿INTELLIGENCE￿				AREA			OFF
MOTION		OFF
ADVANCED		OFF
MASK AREA	1 2 3 4
DISPLAY		ON
SENSITIVITY	[4]
RESOLUTION	[5]			￿		￿	￿
ALARM OUT			￿
￿			￿

You can set the motion detection and tracking in the INTELLIGENCE menu.

❖ MOTION [OFF,TRACKING,DETECTION]

•TRACKINGDetects and tracks a moving object.•DETECTIONDetects a moving object.

You can set the position and detection direction of the LINE, and the size and position of the AREA.

- How to set the line

	￿LINE￿
PIXEL LEVEL			[4]
<POINT>￿
DIRECTION				￿￿
￿		￿			￿

ENG

Note :

–If it is set to DETECTION, you can not set such functions as FIXED/MOVED and FENCE in the ADVANCED menu.

❖ ADVANCED [OFF, FIXED/MOVED, FENCE]

Detects a motion of an object and displays an image of any moving object before tracking the moving route.

•FENCE

This is to detect if a moving object passes through the specified LINE or AREA.

In a condition where a moving object is detected in an analysis of the previous and current frames whose movement overlaps a certain area, the system displays “PASS” if the object’s center line passes through the line while it displays “ENTER” or “EXIT” if the center point passes through the area.

①If you press the SETUP switch with the LINE option set to ON, you can specify the position and detection direction of the line.

②If you change the PIXEL LEVEL for setting

the position, specify the pixel that moves by a single pressure of the ￿￿￿￿ switch.

③In <POINT>, you can specify the first position of the line by pressing the SETUP switch once, and

the second position by pressing the switch again. Use the ￿￿￿￿switch to specify the position.

Set each position of the two points and press the SETUP switch to complete the positioning.

④If you change the DIRECTION, you can specify the detection direction. The detection direction based on the defined two points will be displayed on the screen.

English – 23