How to use OSD Menu
The camera will automatically switch between DAY and NIGHT mode, according to the lighting condition.
If you press the SETUP switch with an AUTO- based sub menu selected, you will see the appropriate screen.
| AUTO |
| |
BURST |
|
| OFF |
DAYNIGHT |
|
| |
BRIGHTNESS |
| MID | |
DWELL TIME |
| 2S | |
NIGHTDAY |
|
| |
BRIGHTNESS |
| MID | |
DWELL TIME |
| 5S | |
MASK AREA |
| 1 2 | |
You can set the BURST option to OFF/ON, or select to output the Burst signal in NIGHT mode.
You can select from LOW, MID and HIGH for the brightness of DAYNIGHT, which is a brightness level in switching from the color filter to
The DWELL TIME of DAYNIGHT is a time required to determine the need for switching the filter.
You can select from LOW, MID and HIGH for the brightness of NIGHTDAY, which is a brightness level in switching from the
The DWELL TIME of NIGHTDAY is a time required to determine the need for switching the filter.
The MASK menu is used to prevent a filter switch error or inability of determining the switch in existence of a high spot light source at night. If you press the SETUP switch in item 1 or 2 of the MASK menu, you will see a menu where you can specify an area to mask.
MASK AREA
<SIZE> <LOCATION>
|
You can specify Mask 1 and 2 simultaneously. The mask is used only for determining the filter switch and any excessive bright area at night will be masked.
Note :
–If BACKLIGHT is set to BLC, the MASK AREA function will be deactivated.
•EXTThis enables an auto switch between DAY and NIGHT mode using the interface with the external sensor.
❖ WHITE BAL | [DAY/NIGHT] |
If you want to adjust the color scheme, use the WHITE BALANCE function.
• DAYIn DAY mode, you can set the color values of RED and BLUE. The screen will be displayed in colors according to your settings.
| WHITE BAL |
|
|
| |
DAY/NIGHT |
|
| DAY | ||
MODE |
|
| AWC | ||
RED | |||||
BLUE | |||||
[0248] |
|
|
| ||
|
|
| |||
[0247] |
|
|
| ||
|
Note :
–You can set the values of