CAMERA SET
You can configure the general settings of the camera module.
1.Select <MAIN MENU> - <CAMERA SET>.
The Camera Setup menu appears. | CAMERA SET | ||
2. Change the settings as necessary, or select | CAMERA ID | OFF | |
VPS | OFF | ||
an item to check. | |||
IRIS | ALC | ||
| MOTION | (F.FAST) | |
| DNR | MID | |
| SHUTTER | (OFF) | |
| AUTO X4 | ||
| FLICKERLESS | OFF | |
| XDR | MID | |
English
Provide the ID and location for a camera that displays on the screen.
1.Select <CAMERA SET> - <CAMERA ID>.
2.Use ▲▼_+ to select a desired character, then press [ENTER].
In the lower input box of the screen, the selected character will be entered.
You can enter up to 54 characters including alphabets, numbers and special characters.
ABCDEFGHIJKLMNOPQRSTUVWXYZO 123456789 :
SP SP LOCATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
LOCATION : Specify the display position of the camera ID.
3.When done, press [ENTER].
The camera ID will be displayed in the specified position.
VPS
If you set it to <ON>, the camera images will be displayed in progressive mode.
M VPS is only available for