Samsung SR-608EV HOW TO USE WATER DISPENSER

Water supply lever

HOW TO USE WATER DISPENSER (MODELS APPLIED : SR-608EV/648EV/688EV)

1	Please lift up and pull out the water tank.	Groove for hand-grip
	• Please hold the groove of both hand grips and
	pull out the water tank while lifting it up.

• Please clean the inside of water tank when using it for the first time.(Refer to page 21)

2	Please fill the water tank with water after placing it up on flat surface except for water sup-
	ply device.
	• Please supply the water up to 2.5l of water level window since water may overflow when clos-
	ing the round lid if water is too full.
	• It is possible to fill the water with water tank inserted in the refrigerator.
	Water level window Hand-grip
Round lid
	2.5
Water tank
	Water supply device
Method 1.: Please fill the water after lift up the round lid		Method 2.: Please fill the water after holding and lifting
	to the arrow direction to open it.	both hand-grips of large lid to open it.

3	Please close the refrigerator door
	after inserting the water tank.
	• Please confirm whether the water

exit of water supply device is outside after closing the door.

Please press down the water sup-

4 ply lever with hands after placing

cup on platform for cup.

•Please lay the cup deep inside to the extent the cup can reach the inner wall slightly.

•If hands were removed from cup, there is no water supplied.

•Please desert 2~3 cups of water when using the water dispenser for the

first time after installation.

• In case of continuous water drinking, about 10~15 cups of water are availble.

20