Cooling Your Room
You must select the Cool mode if you wish to adjust the:
◆ | Cooling temperature | |
◆ Fan speed when cooling | ||
1 If necessary, press the | (On/Off) button. | |
Result: | ◆ The operation indicator on the indoor unit lights up. | |
| ◆ The air conditioner starts up in the mode selected |
when the unit was last used. ◆ The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆ Plugged in ◆ Stopped
lt will start up normally after three minutes.
2 If the | is not displayed at the top of the remote control, |
|
press the | button on the remote control one or more times until it | |
appears. |
|
|
Result: | ◆ The indoor unit beeps each time you press the | button. |
| ◆ The air conditioner runs in COOL mode. |
|
Note You can change modes at any time.
3To adjust the temperature, press the
Possible temperatures are between 18°C and 30°C inclusive.
Result: ◆ Each time you press the
- The indoor unit beeps
◆ The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature.
◆ If the room temperature reaches the set temperature, the air conditioner stops cooling, but the fan is still operating.
4Select the fan speed by pressing the
Low
Medium
High
Result: Each time you press the
5 To control the direction of the air flow, refer to page 17.