Samsung SHR-4160P manual 47

SHR-4160N/P USER’S MANUAL

Note

[Date/Time Change]

Pressing “OK” after you change date and time, you will be asked by a pop-up window if you really confirm the change. Here, press “Yes” to change the time. Since Date/Time does not change in backup process, be sure to stop the

backup process before you change Date/Time.

Caution

[Date/Time Change]

If you restore Date/Time to the original value, the data recorded before the restoration may be deleted. For example, if you restore 8 am to 7 am, all the data recorded between the times will be deleted.

●Date Format

This supplies 3 formats, Year-Month-Date / Date-Month-Year / Month-Date-Year.

●Time Format

This supplies 2 formats, 24 Hour / 12 Hour(AM/PM).

●Language

After you select a language, OSD is expressed in the selected language. The available languages are added in the list.

●DST(Daylight Saving Time)

DST sets the watch one hour faster than the local standard time. This makes the system count for DST in DST regions.

Being the DST setup date, the set goes one hour faster and starts rebooting.

Set to Off, DST does not operate. Then, you are unable to enter the right date menu. Set to On, you can set the start time on the left and the end time on the right on the basis of ‘~’. DST is allowed to set Month/Date/Time only.

Year/Minute/Second remains inactivated.

Note

[When the DST is operated]

The proceeding backup is cancelled. Recording in progress will be suspended for a moment until rebooting.

Caution

[When the DST is operated]

As the system goes one hour earlier, the data recorded since an hour ago will be deleted. As DST activates at the preset time, you are recommended to take the utmost care of preventing any trouble incurred by data deletion or rebooting.

5-3