Samsung SM-N910F Mono audio, Sound detectors, Baby crying detector, Doorbell detector, Change doorbell sound

Accessibility

Mono audio

Mono output combines stereo sound into one signal that is played through all headset speakers. Use this if you have a hearing impairment or if a single earbud is more convenient.

On the All apps screen, tap Settings →Accessibility →Hearing, and then tick Mono audio.

Sound detectors

Set the device to vibrate when it detects your doorbell or a baby crying.

Baby crying detector

1 On the All apps screen, tap Settings →Accessibility →Hearing →Sound detectors → Baby crying detector and tap the switch to activate it.

2

3

Read the on-screen information and tap OK.

Tap to start using the baby crying detector.

The device will vibrate when it detects sound and the alert will be saved as a log.

Doorbell detector

1 On the All apps screen, tap Settings →Accessibility →Hearing →Sound detectors → Doorbell detector and tap the switch to activate it.

2

3

4

Read the on-screen information and tap OK.

Tap to make a recording of your doorbell. When you are finished recording, tap NEXT.

Tap and ring your doorbell to check if it is recorded correctly. When the device detects the doorbell sound, tap OK.

To change the doorbell sound, tap →Change doorbell sound.

When the doorbell detector is set up, tap to start using the doorbell detector. The device will vibrate when it detects the doorbell sound.

171