Samsung SP-F10M SP1055XWX/EN, SP1055XWX/ZX 2-11Connecting a PC using an HDMI/DVI cable

2-11 Connecting a PC using an HDMI/DVI cable

The appearance and the color may differ depending on the model.

Make sure that your PC and projector are turned off.

1.Connect the [HDMI/DVI IN] terminal of the projector to the HDMI or DVI terminal of your PC using a HDMI/HDMI or HDMI/DVI cable (Not supplied).

-If you are connecting to the HDMI terminal of your PC, use an HDMI/HDMI cable (Not supplied).

-For the supported resolutions and refresh rates, see PC Timing (D-Sub/HDMI) in Section 2-8, "Supported Display Modes".

2.If you connected using a HDMI/DVI cable, connect the [AV IN (L-AUDIO-R)] terminal of the projector to the Audio out terminal of your PC using an audio cable (Not supplied).

-If you connected with a HDMI/HDMI cable, you do not need an audio cable.

2-11 Installation and Connection