Samsung SP-M220 SP2003XWX/EN, SP2203XWX/EN, SP2203XWX/ZA, SP2503XWX/EN 2-12Connecting an HDMI-CompatibleDevice

2-12 Connecting an HDMI-Compatible Device

Make sure that the AV device and your projector are turned off.

1.Connect the [HDMI/DVI IN] terminal at the back of the projector to the HDMI or HDMI/DVI output terminal of the digital output device using an HDMI/DVI or HDMI/HDMI cable.

-If you are connecting to the HDMI output terminal on the digital output device, use an HDMI/HDMI cable.

-For supported input signal formats, resolutions, and frequencies, see AV Timing(HDMI) in Section 2-8, "Supported Display Modes".

2.If you connected using a HDMI/DVI cable, connect the [AUDIO IN (L-AUDIO-R)] terminal on the projector to the Audio out terminal on your digital output device using an audio cable (Not supplied).

-If you connected with a HDMI/HDMI cable, you do not need an audio cable.

2-12 Installation and Connection