2-11 Connecting a PC using an HDMI/DVI cable
2-11-1. Connecting a PC using an HDMI/DVI cable
Make sure that your PC and projector are turned off.
1.Connect the [HDMI/DVI IN] terminal of the projector to the HDMI or DVI terminal of your PC using a HDMI/HDMI or HDMI/DVI cable (Not supplied).
-If you are connecting to the HDMI terminal of your PC, use an HDMI/HDMI cable (Not supplied).
-For the supported resolutions and refresh rates, see PC Timing
2-11-2. Configuring the Audio Settings for Your PC
When the projector is connected to the PC via an HDMI cable, you can change the audio settings as follows:
1.In Category View of Windows XP : Go to Control Panel - [Sounds, Speech and Audio Devices], and select <Speaker Settings>.
Installation and Connection |