Samsung D400SX SP-D400S SPD400SFX/EN, SPD400SX/EN, SPD400SX/XS manual 34

Lamp Replacement Procedure

The lamp is very hot and operates with a high voltage. Allow it to cool down for at least 1 hour after disconnecting the power cord before changing the lamp.

Remove the screws as shown in the figure.

The lamp is located at the bottom	Slide and open the cover in the
of the product.	direction of the arrow, as shown in
Place the product so that its	the figure.
bottom looks upward and remove
the screws that hold the lamp
cover in place.

*When placing the product with the bottom upwards, make sure to place a soft cloth on the floor to prevent scratches.

As shown in the figure, lift up the lamp handles by holding them and pull the lamp.

Assembling a new lamp is in the reverse order of the disassembly.

Care and Maintenance Contact SAMSUNG WORLDWIDE Other Authority

If you have any questions or comments relating to Samsung products, please contact a SAMSUNG customer care center.

	North America
U.S.A	1-800-SAMSUNG(726-7864)	http://www.samsung.com/us
CANADA	1-800-SAMSUNG(726-7864)	http://www.samsung.com/ca
MEXICO	01-800-SAMSUNG(726-7864)	http://www.samsung.com/mx
	Latin America
ARGENTINE	0800-333-3733	http://www.samsung.com/ar
BRAZIL	0800-124-421	http://www.samsung.com/br
	4004-0000
CHILE	800-SAMSUNG(726-7864)	http://www.samsung.com/cl
COLOMBIA	01-8000112112	http://www.samsung.com/co
COSTA RICA	0-800-507-7267	http://www.samsung.com/latin
ECUADOR	1-800-10-7267	http://www.samsung.com/latin