Connections
Method 3 Connecting to Mobile Device viaThe
Mobile Device
1.On the player, get the player's device name. (Navigate to Settings > General > System Manager > Device Name.)
2.Start Samsung Connect on the mobile device. In the list that appears, find the player's device name. (You may need to run Scan for Devices.)
3.Select the player's device name. In the drop down list that appears below it, select "TV to mobile device" (or "BD to mobile device").
4.The mobile device displays a connecting message. The TV displays a permission request. Select Allow using the player's remote.
NOTE
\\ After you select Allow the first time, you will not need to select Allow again unless you cancel permission.
5.In a few moments, the content being played by the player appears on the mobile device's screen.
6.To stop the
NOTES
\\ Samsung Connect can be referred to as
\\ If your wireless router
Connecting to a Network Router
You can connect your product to your network router using one of the methods illustrated below. The connection can be wireless or wired.
Wireless Network
RouterWall connectionNOTES
\\ If your wireless router supports DHCP, this product can use a DHCP or static IP address to connect to the wireless network.
\\ Set your wireless router to Infrastructure mode.
\\ The product supports only the following wireless security key protocols:
\\ Select a channel on the wireless router that is not currently being used. If the channel set for the wireless router is currently being used by another device nearby, it will result in interference and communication failure.
\\ If you select the Pure