■■ Scan Mode (All Channels / Free Channels Only): Selects the scanning mode of the selected satellite.
Manual Store
Scans for a channel manually and stores in the TV.✎✎If a channel is locked using the Child Lock function, the PIN input window appears.
When Antenna Source is set to Air or Cable:
■■ Digital Channel: When scanning has finished, channels are updated in the channel list.
✎✎ When selecting Antenna → Air: Channel, Frequency, Bandwidth✎✎ When selecting Antenna → Cable: Frequency, Modulation, Symbol Rate■■ Analogue Channel (Programme, Colour System, Sound System, Channel, Search): If there is abnormal sound or no sound, reselect the sound standard required.
✎✎Channel modexx P (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.
xx C (aerial channel mode) / S (cable channel mode): These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.
When Antenna Source is set to Satellite:
■■ Satellite: Selects the satellite using the up/down buttons.■■ Transponder: Selects the transponder using the up/ down buttons.■■ Scan Mode (All Channels / Free Channels Only): Selects either free or all channels to store.
■■ Network Search (Disable / Enable): Enable / Disable network search using the up/down buttons.
■■ Signal Quality: Display the current status of broadcasting signal.✎✎Information on a satellite and its transponder is subject to change depending on the broadcasting conditions.
✎✎When setting is completed, move to Search and press the ENTEREbutton. Channel scan is started.
Satellite System Setup
The PIN input screen appears. Enter your 4 digit PIN number. Satellite System Setup is available when Antenna is set to Satellite. Before running Auto Store, set
Satellite System Setup. Then channel scan is run normally.■■ Satellite Selection: You can choose the satellites for this TV.■■ LNB Power (Off / On): Enables or disables the power supply for the LNB.■■ LNB Settings: Configures the outdoor equipment.––Satellite: Selects the satellite for receiving digital broadcasts.––Transponder: Selects a transponder from the list or adds a new transponder.––DiSEqC Mode: Selects DiSEqC mode for the selected LNB.––Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency.––Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency.––Tone 22 kHz (Off / On / Auto): Selects the Tone 22 kHz depending on the LNB type. For a universal LNB it should be Auto.
––Signal Quality: Display the current status of broadcasting signal.■■ Positioner Settings: Configures the antenna positioner.Positioner (On / Off): Enables or disables the positioned control.Positioner Type (USALS / DiSEqC 1.2): Sets the positioned type between DiSEqC 1.2 and USALS(Universal Satellite Automatic Location System).
––My Longitude: Sets the longitude for my location.––My Latitude: Sets the latitude for my location.––Satellite Longitude Settings: Sets the longitude of user defined satellites.User Mode: Sets the position of satellite antenna according to each satellite. If you store the current position of satellite antenna according to a certain satellite, when the signal of that satellite is needed, the satellite antenna can be moved to
––Moving Mode: Selects the movement mode between discrete and continuous movement.
––Step Size: Adjusts the step size degrees for the antenna rotation. Step Size is available when Moving Mode is set to Step.
English 15