Samsung UE46C8000XW Picture Options, ✎✎NOTE, English, of the time, BasicFeatures03, Red: Adjust the red level, Blue: Adjust the blue level, Green: Adjust the green level

■■ White Balance: Adjust the colour temperature for a more natural picture.

R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.Reset: Resets the White Balance to it’s default settings.

■■ 10p White Balance (Off / On): Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.

✎✎ Available when the picture mode is set to Movie and when the external input is set to HDMI or Component.

✎✎ Some external devices may not support this function.Interval: Select interval to adjust.Red: Adjust the red level.Green: Adjust the green level.Blue: Adjust the blue level.Reset: Resets the 10p White Balance to its default settings.■■ Flesh Tone: Emphasize pink “Flesh Tone.”■■ Edge Enhancement (Off / On): Emphasize object boundaries.

■■ xvYCC (Off / On): Setting the xvYCC mode on increases detail and colour space when watching movies from an external device (e.g. DVD player) connected to the HDMI or Component IN jacks.

✎✎ Available when the picture mode is set to Movie and when the external input is set to HDMI or Component.

✎✎ Some external devices may not support this function.

■■ LED Motion Plus (Off / Normal / Cinema / Ticker): Removes drag from fast scenes with a lot of movement to provide a clear picture.

Picture Options

✎✎In PC mode, you can only make changes to the Colour Tone, Size and Auto Protection Time.

Picture Options

Colour Tone	: Normal	►
Size	: Auto Wide
Screen Mode	: 16:9
Digital Noise Filter	: Auto
MPEG Noise Filter	: Auto
HDMI Black Level	: Normal
Film Mode	: Off
	▼
	UMove EEnter	RReturn

■■ Colour Tone (Cool / Normal / Warm1 / Warm2)✎✎ Warm1 or Warm2 will be deactivated when the picture mode is Dynamic.

✎✎ Settings can be adjusted and stored for each external device connected to an input on the TV.

■■ Size: Your cable box/satellite receiver	P.SIZE
may have its own set of screen
sizes as well. However, we highly
recommend you use 16:9 mode most
of the time.

Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.

16:9: Adjusts the picture size to 16:9 for DVDs or wide broadcasting.

Wide Zoom: Magnifies the picture size more than 4:3. ✎✎ Adjusts the Position by using ▲, ▼ buttons.

Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.✎✎ Adjusts the Position or Size by using ▲, ▼ button.4:3: The default setting for a movie or normal broadcasting.

✎✎ Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention(screen burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.

✎✎NOTE

xx Depending on the input source, the picture size options may vary.xx The available items may differ depending on the selected mode.xx In PC mode, only 16:9 and 4:3 modes can be adjusted.

xx Settings can be adjusted and stored for each external device connected to an input on the TV.

xx After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Adjusts the Position or Size by using ▲, ▼, ◄, ► button.

xx If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function.

■■ Screen Mode (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size.

✎✎ Not available in PC, Component or HDMI mode.

BasicFeatures03

English 17